7’’ Open frame touch panel pc running Linux system
The board + LCD Screen
ARM mother board with Cortex A8 1.0Ghz
Memory: 512M Bytes DDR3 SDRAM + EMMC 256M flash
7” resistive / projected capacitive touch screen
CAN & GPIO (optional)
| CPU | Cortex A8 1.0GHz |
| Display | 7″ high-brightness LCD screen; 250cd/m2 brightness |
| Resolution | 800 x 480 |
| Memory | DDRIII 512MB |
| Flash | EMMC 256MB |
| Extension storage | Micro SD, Max up to 32GB |
| Network interface | 1x 100Mbps Ethernet controller |
| I/O | 1 x RS232 COM, 1 x RS232 (test port) 1 x RS485 com 1 x USB2.0 + 1 x USB slave 1 x LAN Support 19V ~ 24V Power input |
| Touch Screen | Resistive / capacitive touch screen (optional) |
| Power Supply | Supports 9-24VDC. Kindly advice 24VDC or 12VDC |
| Power consumption | 3.12W (12V, 260mA) |
| Watchdog | The time can be adjusted |
| Buzzer | Built-in, provides function control sound; |
| WIFI | Optional |
| 3G | WCDMA optional |
| Operating system | Linux system |
| Fanless | Fan less design |
| Dimension | 184mm (L) x 118.5mm (W) × 18mm (H) |
| Installation | Panel type, wall- mount, Table, bracket etc |
| Net weight | 0.5kg |
| Gross weight | About 2kg |
| Operating Temperature | -10℃ ~ 60℃ |
| Humidity | -20℃ ~ 70℃ |
