Introduction

An Universal flexi-bag that fits to a standard 20’ GP container converting it to carry 17 to 24 tons bulk liquids in a safe, efficient and cost effective way.

The Flexitank is ideal packaging product to store and transport all kind of non hazardous chemicals, liquids or food grade liquids. The one-way disposable Flexitank virtually eliminates the possibility of contamination as it is being delivered brand new. The multi time reusable Flexitank is definitely cost effective and economical. The Environment friendly empty bag can easily be disposed.

Advantages of using flexitanks:

• Very low positioning costs
• Can carry 40% or more than drum and 50% or more than bottles
• No repositioning of tank containers
• No cleaning cost
• No disposal costs

Benefits of Flexitank

• Simple, reliable and economical
• Environment friendly
• Eliminate risk of cargo contamination
• Lower transportation costs.
• No tank demurrage
• Low storage cost for empty tanks
• Covered by factory warranty and fully insured

Range of Products

It can be used for a wide range of materials.

Specification:

Composition : Ultra high tensile, multi-ply ethylene co-polymers Fabric

weight: 220 gsm

Total weight : 300 gsm

Tensile strength, weft : 250 Kg/5cm

Tensile strength, warp: 250 Kg/5cm

Tear strength, warp : 110 N

Tear strength, weft: 90 N

Low Temperature Flexibility: - 25 degrees C

High Temperature Flexibility: 70 degrees C

Dart Impact (ASTM D1709): >1260g

Melt point index: 0.8

Elongation MD (ASTM D882): 745 %

Elongation TD (ASTM D882): 750 %

Certifications:

US FDA / German BGA compliance Recommended for foodstuff, pharmaceutical, chemical or Industrial products.

Application:

There are many different types of flexibags for different applications and different usage depending on cargo type and requirement.

Most of the liquids with a specific gravity of 1.0 ( water ) or below ( lighter than 1 ) should be using the top loading and top discharge flexitank with capacity between 23,000 to 24,000 liters. Example: Base Oil which uses this particular type of bag and also same which we are sending. The valve may differ depending on clients' application, requirements and usage.

PP is used for DOP and Foodgrade cargo while PVC is used for other chemicals like latex / lubricants etc.... Both can be used for base oil.

2 inch and 3 inch valves are used depending on customer's preference and requirements.

The top loading and bottom discharge flexitank is used for more viscous liquids especially those with higher S.G. like "Rubber Oil", " Water based Resins", "Glycerin", "Glue“, "Sorbitol" , "Molasses", "Tallow" and many more ........